last updated: Friday, 02-Apr-2004 23:22:52 EST
- audio home
- The Vifa X3
- Preamp
- Car Audio
- Shiva!
- PA Speakers
- Hafler stuff
- Phase Linear
- LM3886 amp
- lm12 amp
Pictures of my Vifa X3...
 |
This is my work area. It's sooooo well equipped. |
| This is the table I work on...it's an old set of bi-fold closet doors on a pair of cheapo sawhorses. Not exctly Norm Abram's workshop. |
 |
 |
This is wht you end up with is you measure and then cut on the wrong side of the line. That's $35 worth of crp MDF. Anybody want it? |
| This is the stack of wood that will eventully become my speakers. |
 |
 |
The mid box for the second of the two speakers being glued between the side panels. This box is getting close to done! |
| Another shot of box #2 being glued. |
 |
 |
This is the mid enclosure for box #1 beign glued. The side panels are only there to hold it in shape so the clamps don't mess up the lignment. |
| This is the midrange enclosue for box #2 in the process of being glued to a side panel. It will get screwed as well after the joint sets. |
 |
 |
The front of box #2 after it was put together some more. |
| The back of box #2 as the internal baffle was put on. |
 |
 |
The side of box #2, following the insertion of about 60 screws. |
| This is a scrp piece of MDF cut so that I could do an initial eval of the mid/tweet combo. It kicks ass. |
 |
 |
This is the crossover for the left channel as it stands on 1/3/00. Fugly, but functional. |
| Two completed crosovers waiting for boxes. The second one was a lot easier to build...it came out a little better. |
 |
 |
Box #2, awaiting final attachment of the baffle. This is what they'll look like when I'm finished. |
| I know, I know, it's overkill, but this is what happens when you predrill screw holes on 3 hours of sleep. besides, the screws were on sale. |
 |
 |
A truly ugly caulking job to keep the air where it's supposed to be in box #2. |
| Box #2, after being totally screwed. |
 |
 |
I'm finished! |
